|
Description
|
N/A
6-32 x 1/8 Cup Point Slotted Headless Set Screw is a slotted headless set screw for field adjustments where a flat-blade screwdriver is easier to source than a matched hex key. The slot can be driven with common flat-blade tools, avoiding the need to identify and carry a separate key size. The hollow-rim point can bite into the mating surface, so selection should consider whether a witness mark is acceptable. Typical uses include pulleys and collars on light shafting, replacement knobs, and serviceable handles, where the exact diameter and length help match a tapped hole or service record. A straight slot transmits less seating torque than a hex socket; when maximum tightening torque governs, compare alloy steel socket cup point set screws. Compare Cup Point Alloy Steel Socket Set Screws when socket-drive tightening is preferred. Need these slotted sets in stainless? Ask; non-catalog sourcing is what Cold Headers does. Cold Headers has supplied specialty fasteners since 1962 and supports hard-to-find slotted set screw sourcing. Selection should reflect the shaft surface, required holding action, access for a flat blade, and the original hardware callout. Technical Highlights- Drive: Straight Slot (flat-blade screwdriver)
- Point: Cup
- Thread Size: 6-32
- Length: 1/8 in.
- Material: Carbon Steel
- Cup Point Diameter: approx. 0.55-0.62 x nominal diameter
- Head: None (headless, installs below surface)
- Dimensional Standard: ASME B18.6.2
Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.
|
N/A
6-32 x 3/16 Cup Point Slotted Headless Set Screw gives maintenance teams a slotted headless set screw option with a cup point for general shaft and hub holding work. Because the screw has no head, it can thread below the surface of a collar, hub, knob, or housing when the tapped hole permits. The cup point is commonly used where localized holding contact is desired and the mating surface can tolerate set screw marks. Typical uses include doorknob and lever spindles, latch hardware, small collars, and older mechanical assemblies, where the exact diameter and length help match a tapped hole or service record. Carbon steel should be kept dry and oiled; ask about stainless options when environmental exposure is part of the job. Review Knurled Point Alloy Steel Socket Set Screws when the application calls for a more aggressive vibration-grip point. Cold Headers helps match exact sizes for legacy hardware, maintenance work, and distributor sourcing requests. When replacing a removed screw, compare thread, length, slot condition, and whether the cup point matches the original intent. Technical Highlights- Drive: Straight Slot (flat-blade screwdriver)
- Point: Cup
- Thread Size: 6-32
- Length: 3/16 in.
- Material: Carbon Steel
- Cup Point Diameter: approx. 0.55-0.62 x nominal diameter
- Head: None (headless, installs below surface)
- Dimensional Standard: ASME B18.6.2
Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.
|
N/A
6-32 x 1/4 Cup Point Slotted Headless Set Screw uses a straight slot drive so a flat-blade screwdriver can seat the cup point without matching an internal socket size. The straight slot is useful in service kits, older equipment, and awkward access points where a screwdriver reaches more naturally than a key. Standard cup proportions run roughly 0.55 to 0.62 of nominal thread diameter, which is why the exact thread size matters. This size is relevant for appliance repair, instrument repair, fan hubs, and adjustment points on compact equipment, especially when the slotted drive is already part of the equipment design. For stainless material requirements, review Cup Point 18-8 Stainless Socket Set Screws. For odd lengths or older slotted hardware callouts, Cold Headers can help identify the closest catalog path. The dimensional reference is ASME B18.6.2, cited here only as the slotted headless set screw dimensional standard. Technical Highlights- Drive: Straight Slot (flat-blade screwdriver)
- Point: Cup
- Thread Size: 6-32
- Length: 1/4 in.
- Material: Carbon Steel
- Cup Point Diameter: approx. 0.55-0.62 x nominal diameter
- Head: None (headless, installs below surface)
- Dimensional Standard: ASME B18.6.2
Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.
|
N/A
6-32 x 5/16 Cup Point Slotted Headless Set Screw is selected when legacy equipment, blind access, or simple service tooling calls for a slotted headless set screw. The headless form keeps the fastener contained in the tapped component while the screwdriver slot remains the drive interface. The cup point uses a hollow rim for localized contact on the mating shaft or component surface. This size is relevant for gears in light equipment, fixture stops, bracket retainers, and general maintenance stock, especially when the slotted drive is already part of the equipment design. Square Head Set Screws remain a wrench-driven alternative in this catalog section. Cold Headers supports exact-size sourcing when a drawing or parts list calls for slotted headless set screw hardware. Check the diameter, length, drive access, mating material, and whether cup-point marking is acceptable before ordering. Technical Highlights- Drive: Straight Slot (flat-blade screwdriver)
- Point: Cup
- Thread Size: 6-32
- Length: 5/16 in.
- Material: Carbon Steel
- Cup Point Diameter: approx. 0.55-0.62 x nominal diameter
- Head: None (headless, installs below surface)
- Dimensional Standard: ASME B18.6.2
Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.
|
N/A
6-32 x 3/8 Cup Point Slotted Headless Set Screw combines headless installation with a cup point and straight slot for compact retention in light mechanical assemblies. For field service, the slot makes tool matching simple while preserving the compact installation expected from a set screw. Cup point geometry is a general-purpose set screw point for friction holding without requiring a drilled hole or machined flat. Use this configuration for electrical panel hardware, equipment covers, control handles, and field service replacement work when the job calls for a headless screw and flat-blade drive access. A straight slot transmits less seating torque than a hex socket; when maximum tightening torque governs, compare alloy steel socket cup point set screws. Use Cold Headers for specialty fastener support when maintenance records call for uncommon cup point slotted sizes. Review the tapped-hole depth, screwdriver clearance, and point contact requirements before replacing a different point style. Technical Highlights- Drive: Straight Slot (flat-blade screwdriver)
- Point: Cup
- Thread Size: 6-32
- Length: 3/8 in.
- Material: Carbon Steel
- Cup Point Diameter: approx. 0.55-0.62 x nominal diameter
- Head: None (headless, installs below surface)
- Dimensional Standard: ASME B18.6.2
Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.
|
