Use the 7/16 x 2 0.001 Oversize Dowel Pin when a worn dowel hole needs a clean replacement fit rather than a move to the next fractional size. Compared with replacing the assembly detail, a properly prepared hole and oversize pin can bring the original locating point back into service.

Refit work after a seized pin was extracted can use this family when the old standard-size fit has been damaged. Review the nominal diameter, actual oversize diameter range, length tolerance, end style, material, and ASME series before substituting a standard pin.

Use Cold Headers when the part must be identified by nominal size, oversize series, length, material, and standard.

Technical Highlights

• Diameter: 0.4385-0.4387 in.
• Length: 2 in. (+/-0.010 in.)
• Series: Oversize (+0.001 in. over nominal, replacement use)
• Hardness: Surface Rc 60 min., Core Rc 47-58
• Ends: One chamfered, one crowned
• Material: Heat Treated Steel
• Dimensional Standard: ASME B18.8.2, Oversize Series

Call 773-775-7900 or email Sales@coldheaders.com for pricing, availability, or a quote.